Run Hardware Diagnostics Tests to Fix HP Computer Startup Issue

Once in a while, your HP computer might break into the startup issues, where your computer simply refuses to start and show some error message on your computer screen. There are several causes of the computer startup issues like incorrect installation of software, the conflict between applications and software and more.  Here, you can troubleshoot the problem with DIY solutions, we have mentioned below with complete HP Computer Support.

If your HP computer does not startup and shows some issues, then you should try to run Hardware Diagnostics Tests to troubleshoot the problem. The test will help you isolate the problem with appropriate solutions-

Desktops - Hard drive is detected in BIOS but the computer does not start:

The Hardware Diagnostics System Fast Test verifies the major workings of your HP computer to ensure that they are functioning or not. Proceed with the steps given and below to use the fast test-   

• First of all, you need to press and hold the power button and wait until your computer turns off properly.

• Now, turn on your computer.   

• Press the F2 key continuously for about every second, until the Hardware Diagnostics screen is displayed.

• Now, click “System Tests” from the UEFI main menu and further click “Fast Test”.

• Next, you need to click “Run Once”.

• In case the fast test detects any issues, then follow the onscreen prompt to fix the issue. 

All-in-Ones - Hard drive is detected in BIOS but the computer does not start:

Steps 1: In UEFI, you need to run the System Quick Test -

• Firstly, here you need to press and hold the power button until the computer turns off completely.

• Now, you need to turn on the computer.

• Press the F2 repeatedly instantly and wait till the HP computer Hardware Diagnostics UEFI screen is displayed.

• Now, you need to click “System Tests” and then click “Quick Test”.

• At last, you have to click “Run Once”.

Step 2: In UEFI you need to run the System Extensive Test -

• Here, you need to first press and then hold the power button until the computer turns off completely.

• Now you have to turn on your HP computer.

• Press F2 key immediately as same as the earlier step. Now, wait till the HP Hardware Diagnostics UEFI screen is displayed.

• Further, you have to click “System Tests”.

• At last, you need to click “Extensive Test”.

Still, you encounter the same startup problems on your HP computer, then directly contact our support service at +1-877-645-7494 and avail HP Computer Technical Support from the experts. Technical executives of our customer support service deliver the best in class support and assistance at an affordable cost. 

How to Troubleshoot Beep Code in HP Computer?

Making one or two beep sound during the startup process or during a BIOS update is normal and common as the function of any computer. But in case your HP computer beeps and Windows does not get started properly, then it might be a serious and critical issue that needs to be getting fixed. To deal with the problem with best HP Computer Technical Support you can contact professionals.

Here, find out the most common reasons behind the beeping sound error-

•   Memory and heat-related failures caused
•   A keyboard key is stuck
•   A memory DIMM or hard drive cable is not configured correctly.
•   A component available on the motherboard is unsuccessful
•   A basic computer function won’t get started

Resolving beep codes:

Follow the steps in order to troubleshoot beeping issues. Before proceeding with the procedure, you need to turn off the computer and then remove the power cord. Once you have completed the task, simply replace any covers, connect the power cords, turn on the computer and further listen to a beep code.

•   First of all, you need to eliminate media from the floppy drives, memory card reader slots, USB ports and CD/DVD drives and further disconnect all the non-essential devices.
•   In the next step, you have to disconnect the mouse and keyboard.
•   Restart the computer, in case the beep sound gets steps, then simply replace the disconnected devices.
•   Remove any obstructions that can block vents. You need to simply clean the cooling vents on the case you remove dust.
•   Next, try to remove the memory cover, and further reseat all memory modules. In case the computer stops beeps sound, it means that a memory module might not have been fully seated or connected.
•   If your HP computer has several memory modules, then you need to turn on the computer with only one memory module installed. Here, if your computer stops beeping sound, then it means that the memory module might be defective or there is wrong memory module for the motherboard. 

Furthermore, if the above steps do not help you to troubleshoot the beep sound problem on your HP printer, feel free to call on HP Computer Support Number . Here, you will be assisted by our best IT technicians who are skilled and experienced in dealing with all sorts of technical errors related to HP computers.   

Experts Guidelines to Troubleshoot HP LaserJet Pro Scanner Error 22

HP is the most used and renowned brand of scanners as it delivers scanners with great features and facilities and marked as the reliable scanners across the world. Although HP LaserJet Pro Scanner is quite prone to some technical problems that frequently display the error code 22. The error appears on the control panel during the time you attempt scanning from the device. The error 22 might appears due to multiple reasons including some extra pressure or weight to the glass of the scanner at the time of scanning an open book. The pressure or the weight can easily affect the procedure of the scanner mechanism. To know more about the error code or to fix the error quickly, get HP Scanner Tech Support from experts’ helpdesk.

Follow the steps given below to troubleshoot the error code 22 in HP LaserJet Pro Scanner:

• Turn on your HP scanner and wait till the scanner get silent for further procedure. 
• Next, disconnect all the connected cables and unplug the power cable from the wall outlet. 
• Then wait for around 60 seconds before you begin the procedure.
• Now, simply plug the power cord and connect all the cables again back to the rear of the scanner.
• Turn on your HP scanner if it is not open automatically. 
• At last, attempt the scanner requirements to perform the warm-up phase where the scanner lights flash and the carriage move further. Afterward, you need to wait till the warm-up period ends. 
• Verify if the error 22 is fixed or not by performing a test scan from your scanner. 

The above-mentioned steps are easy to perform and surely help to troubleshoot the error code 22, but in case you might get any problem or face any sort of difficulty, feel free to call on HP Scanner Support Phone Number . Here, our team of the qualified technician will help you with high-end and instant solutions. 

How to Fix Network Scanner Connection Error in HP Printer?

While scanning from your all in one HP printer, sometimes you might face some problems like the computer or the scanner won’t able to found or the scan fails. Moreover, sometimes, the problem appears with the following error message “An error occurred communicating with the scanning device”, “An error occurred while communicating with the HP imaging device”, “Computer not found”, “No Computer Detected”. These messages indicate that there are some technical glitches or halt with your scanner that might require some quick fix. Here, you can consult experts for HP Scanner Tech Support to deal with the problem. 

Additionally, we have discussed some of the best solutions steps that can be sued to fix the scanner problem easily-

Method 1: Restart devices and check driver scan settings-

• Firstly, turn on your printer. 

• Now, endure that the power cord of the printer is directly connected to an electrical outlet and via some power strip or surge protector. 

• Shut down all the programs on your computer and then shut down the computer. 

• Afterword, you need to turn on your printer and then turn on your computer. 

• Here, you have to attempt a search for your printer model name, and further hit the printer name in the list you got. 

• Then you need to follow the onscreen instructions.

• Once you complete the above process, try to scan and check if it is working properly. 

Method 2: Check the network and printer connection status-

• You need to ensure that the printer is connected properly to the network.  

• Most of the routers can function with both 2.4 GHz and 5.0 GHz frequency bands, but it is not possible with all HP printers and scanners. Here, ensure that the 2.4 GHz router band is allowed and broadcasting. If the router broadcasts separate network names (SSIDs) for each band, connect the printer to the 2.4 GHz band SSID. If the printer is compatible with 5.0 GHz, then you need to connect it to the 5.0 GHz band SSID.

• On the computer, mouse over the network icon in the notification area to view the network name and status of the connection. Here, you need to perform the steps according to the printer demands and requirements for which you have to follow the onscreen instructions.

• Try to scan and check if it is working. 

The above-stated solutions and easy and simple to attempt, but in case you encounter any sort of problem with the above steps, feel free to call on HP Scanner Support Phone Number . The number is offered to every customer who is seeking help for their HP scanner. Here, our support providers are available to deliver the world-best support with high-end solutions.